Model : Sony Ericsson X10
1. Put in a sim card from a non accepted network
2. Turn on the phone
3. It will then request for an unlock code
4. Press the unlock code box with your finger and then the number pad will appear at the bottom of screen
5. Input the unlock code
6. Press "UNLOCK" button which is below the unlock code box on screen
Model : 99% SonyEricsson
1 - Switch ON your phone without SIM Card,
2 - Press 1 time the left arrow,
3 - Press 2 times the button * ,
4 - Press 1 time the left arrow,
5 - The message "Personalize with MNC2" will appear,
6 - You can now enter the Unlock Code we send to you.
If your phone have a "JOGDIAL" (ex : SonyEricsson K700i) you must press "down arrow" instead of "left arrow" for step 2 & 3. We mean by "Down Arrow" to direct the Jogdial down !
W950 models need to use * up * down ** down (up/down using the jog dial on the side).
Model : Satio
compose #pw+CODE+1#
tap repeatedly the star key to get p w + symbols
NOTE: when you receive your unlock codes they will look similar to the EXAMPLE below
Your unlock code is : CB5A0LMV54CLCK4U: (7236815939285074)ESLCK4U: (7442674319237997)NLCK4U: (2686812912591633)NSLCK4U: (4264944109888159)SPLCK4U: (1965441718581423)
the actual codes are in the brackets "numbers only" the codes to the left of the numbers correspond to the type of lock
so to decipher the correct code look at this example below, we will highlight the lock name and relevant unlock code for that lock
Your unlock code is : CB5A0LMV54
CLCK4U: (7236815939285074) = CLCK
ESLCK4U: (7442674319237997) = ESL
NLCK4U: (2686812912591633) = NCK
NSLCK4U: (4264944109888159) = NSCK
SPLCK4U: (1965441718581423) = SPCK
